Adapter

...

4" OD -- Y adapter...

Thread on hose end adapters Connects to 2-1/2" hose...

Ideal for connections to 2-1/2" shop vacuum hose. Flexible construction allows easy connection to power tools. OD sizes are 2-1/2", 2", 1-1/2", 1-1/4", 1" — ID sizes are 1/4" less than O.D. sizes....

Adapter for PSI Templates This adapter adapts PSI templates for use with your new Vega Midi Duplicator. Also suitable for thinner flat template stock up to 1/16" thick....

Adapter From 1" x 8tpi headstock to 3/4 x 16tpi male thread. Convert your spindle so that you can use chucks with different thread sizes....

Adapter From 1" x 12 tpi headstock to 1" x 8tpi male thread. Convert your spindle so that you can use chucks with different thread sizes....

Spindle adapters for Barracuda4 to 1" x 8 tpi headstock thread...

Adapter From 5/8" Shopmith headstock to 1" x 8tpi male thread. Convert your spindle so that you can use chucks with different thread sizes....

This new ABS plastic adapter is tapered from 4" OD down to 1" OD. Slice the adapter at the appropriate diameter to adapt to your machine port or smaller ID hose. The adapter has flat portions at 4...

Female adapter for a machine used with QuickKonnex system. Allows an instant sealed connection to your machine port without clamps. Simply attach the male component to your hose end and the female...

Now you can use our 5/8" shaft specialty toolrests on any lathe. This clever adapter has an I.D of 5/8" to accept our toolrest shafts and an O.D compatible with your lathe. Simple installation...

Spindle adapters for Barracuda4 to M33 x 3.5 tpi headstock thread...

Adapter From 3/4" x 16 tpi headstock to 1" x 8 tpi male thread. Convert your spindle so that you can use chucks with different thread sizes....

Adapter From 3/4" x 10 tpi headstock to 1" x 8tpi male thread. Convert your spindle so that you can use chucks with different thread sizes....

Semi-rigid adapter -- 4" to 3"....

Male adapter for hose used with QuickKonnex system. Allows an instant sealed connection to your machine port without clamps. Simply attach the male component to your hose end and the female component...

Male / hose adapter for premium metal quick disconnect system....

Now you can use our 5/8" shaft specialty toolrests on any lathe. This clever adapter has an I.D of 5/8" to accept our toolrest shafts and an O.D compatible with your lathe. Simple installation...

Now you can use our 5/8" shaft specialty toolrests on any lathe. This clever adapter has an I.D of 5/8" to accept our toolrest shafts and an O.D compatible with your lathe. Simple installation...

Adapter From 1-1/2" x 8tpi headstock to 1" x 8tpi male thread. Convert your spindle so that you can use chucks with different thread sizes....

Adapter From M33 x 3.5 tpi headstock to 1" x 8 tpi male thread. Convert your spindle so that you can use chucks with different thread sizes....

Spindle adapters for Barracuda4 to 1-1/4" x 8 tpi headstock thread...

Adapter From 1-1/4" x 8tpi headstock to 1" x 8tpi male thread. Convert your spindle so that you can use chucks with different thread sizes....