Chuck

Maximum Performance Our self-centering heavy duty chuck for full-size lathes makes easy work of your heaviest and largest turnings. The geared key mechanism provides a powerful grip capable...

Mount your bowls snugly and securely with this dedicated chrome plated 3" Faceplate / Screw Chuck with 3/4" screw & 4 counter sink mounting holes. Just mark the center of your blank then screw...

Mount your bowls snugly and securely with this dedicated chrome plated 4" Faceplate / Screw Chuck with 1" long screw & 8 counter sink mounting holes. Just mark the center of your blank then screw...

Get precision gripping and centering of small diameter dowls and tenons. Ideal for gripping pen mandrels, bottle stoppers and other small projects where a tenon is used for chucking. Easily hand...

Idealfor small projects, cups, minatures & spindle work The Barracuda3 Lever Operated Micro Lathe Chuck System isa full featured and complete scroll chuck system in a small package.It's a 4-jaw self...

Here is a full featured and complete key operated scroll chuck system in a small package. The keyed operation allows you to use a single hand to tighten the jaws while you other hand is free...

Numerous turning projects require a “jam chuck” — however hand turning the chuck is time consuming and not always accurate. This system solves the jam chuck problem. Insert the system’s tough rubber...

This self-centering, 3-jaw micro chuck is ideal for holding small projects from the inside or outside. Its step jaws reverse for extra versatility. Its small diameter provides a safety feature...

1" x 8 tpi screw chuck with 3/16" screw to mount and turn blanks. Ideal for small bowls. Includes a replaceable #10 (3/16") screw, and a set screw that locks the screw in place. Simply drill a 1...

For #1 MT headstock and tailstocks. Quick and easy mechanism - used without a key. 1/2" grip for grabbing small turnings or pen mandrels on the headstock- or a drill bit in the tailstock. Accepts a......

For #2 MT headstock and tailstocks. Quick and easy mechanism - used without a key. 1/2" grip for grabbing small turnings or pen mandrels on the headstock- or a drill bit in the tailstock. Accepts a......

Versatile 9-piece Self Centering lathe chuck system for large lathesThis heavyweight, heavy-duty, large body chuck is ideal for larger lathes. Designed to be used on lathes with 10" swings and larger...

Jumbo Jaws for Barracuda 4 Lathe Chuck. Ideal for mounting your work for finishing the bottom of a bowl. Includes 8 rubber rips. Opens to grip bowls from 4" to 10" internally (not compatible with "C...

Barracuda2 One of the easiest to use, best value chucks on the market The Barracuda2 is an easy to use, high-performance, full accessorized key operated self centering four-jaw lathe chuck system...

Drill Chuck Mandrel for 1-9/16" Mini Vanity Projects - Simplifies Turning Vanity Project DiscsAdhere a blank that is 3/16" thick to the face of the mandrel and turn to the exact diameter required...

Drill Chuck Mandrel for 2-1/16" Mini Vanity Projects - Simplifies Turning Vanity Project DiscsAdhere a blank that is 3/16" thick to the face of the mandrel and turn to the exact diameter required...

5" flat jaws used for finishing bowl bottoms. Holds bowls up to 5" diameter. Includes 8 rubber pins to securely hold your bowl in position. Compatible with "C" style chucks including: CMG3C, CUG...

8" flat jaws used for finishing bowl bottoms. Holds bowls up to 8-1/4" diameter. Includes 8 rubber pins to securely hold your bowl in position. Compatible with "C" style chucks including: CMG3C, CUG...

Universal Lathe Drill Chuck Mandrel Set: For any lathe with drill chuckDrill chuck mandrel. Includes long mandrel, knurled nut, seven 7mm bushings, 7mm drill bit. Compatible with all PSI bushings...

Barracuda 4 Chuck body. Use your extra jaws on this body to have an extra chuck ready to go at a moments notice. Includes chuck key, Allen wrench and 8 jaw screws (no jaws included)....

#2 Morse taper for Delta and Jet lathe headstocks or tailstocks. A 3/8" grip can be used for grabbing small turnings or pen mandrels on the headstock or a drill bit in the tailstock. Accepts a 1/4-20......

Barracuda 2 Chuck body. Use your extra jaws on this body to have an extra chuck ready to go at a moments notice. Includes chuck key, Allen wrench and 8 jaw screws (no jaws included)....

#1 Morse taper for Carba-tec or similar Mini-Lathes, mounts to headstocks or tailstocks. A 3/8" grip can be used for grabbing small turnings or pen mandrels on the headstock or a drill bit in the......

#1 Morse taper for Carba-tec or similar Mini-Lathes, mounts to headstocks or tailstocks. A 1/2"" grip can be used for grabbing small turnings or pen mandrels on the headstock or a drill bit in the......